Intumescent strips block the gap between the door and the frame

When installing internal fire doors, it is essential to choose a product that is certified to meet international standards. ClearView, for example, is ISO 14001 certified for environmental management and ISO 45001 certified for Occupational Health and Safety. These certifications ensure that processes are tested rigorously to guarantee safety and effectiveness. They also ensure that the company practices cost-effective and environmentally responsible practices.

Intumescent strips block the gap between the door and the frame

Intumescent strips are installed in the frame and the edge of an internal fire door to prevent smoke and fire from entering the interior of the building. Fire doors sealed with intumescent strips can reduce smoke and fire passage by 30-60 minutes, depending on the type of fire doors and intumescent strips installed. This can mean more lives saved and reduced property damage.

Installing these strips can be a simple task. Intumescent strips are chemically designed to expand when exposed to extreme heat, preventing smoke and flames from spreading throughout the building. They are easy to install, and can be installed on both fire doors with grooves and those without.

Intumescent seals protect the door from water

Intumescent seals are a vital fire protection measure for internal fire doors. They are made of a thin, chemically-resistant strip that is mounted onto the frame of fire doors. When a fire breaks out, the strip expands and seals the gaps around the door. This oak internal fire doors allows for the fire to be contained in the room and prevent smoke and water from escaping. The seal also helps detect fire as smoke leakage can be a sign of a fire.

Intumescent fire seals can be either flexible or rigid and are typically made of polythene. They expand to several times their original volume upon fire exposure. When installed correctly, intumescent seals prevent water from escaping and are able to prevent the passage of superheated gases and flames. They are also non-toxic and clean, and show excellent durability.

Wedging or pinning back of a fire door is unacceptable

Fire doors are vital for the safety of a building and reduce fire risks by delaying the spread of fire and toxic smoke. Properly installed fire doors provide up to 60 minutes of protection from fire and provide a clear means of escape. In an increasingly modern world, fire safety regulations have become more strict and the use of fire doors has become a necessity.

A wedged fire door prevents the fire door from closing properly and may put people’s lives at risk. It is also against the law and can result in fines and even prison sentences. Wedging or pinning back of an interior fire door is not only dangerous, but can also lead to insurance cover not covering any damage caused by the fire.

FD30 is the minimum fire-resistance rating for a fire door

If you want your internal fire doors to be as safe as possible, you should look for an FD30 fire-resistance rating. This rating provides protection against fire for 30 minutes, and it also prevents smoke from entering your building at room temperature. If your internal doors are not FD30-rated, you should ask a contractor to install one that meets this standard. These doors need to meet specific fire safety regulations, which vary depending on the type of building and location. For more information on these requirements, you can consult practical guidance published in conjunction with building regulations.

A fire-resistance door will display a label that identifies its manufacturer, date of manufacture, and designated fire rating. Some doors will also display a colour-coded plug for easy identification. Additionally, hospital fire doors will display a disc at the top of the face, which indicates the designated fire performance.

Maintenance of a fire door

Regular maintenance and inspections of fire doors are crucial to ensuring they are safe and efficient. It is important that the door’s seals are intact and the labels legible. Also, the exit signs should be well lit and not blocked by debris. Check all the hardware components, including hinges and latches, as well as the seals and signage. It is essential to follow a systematic inspection process, as improper maintenance could lead to legal action and put lives at risk.

Regular checkups are essential, especially in newly-occupied buildings. They should be carried out once a month or weekly, depending on the frequency of use. High-traffic doors should be inspected more often than those with low traffic volumes, as they are more likely to suffer damage. Also, they will be a vital barrier in communal areas.